This page is part of archived documentation for openHAB 4.1. Go to the current stable version
# air-Q Binding
The air-Q Binding integrates the air analyzer air-Q (opens new window) device into the openHAB system.
With the binding, it is possible to subscribe to all data delivered by the air-Q device.
# Supported Things
Only one Thing is supported: The airq
device.
This Binding was tested with an air-Q Pro
device with 14 sensors. It also works with an air-Q
device with 11 sensors.
# Discovery
Auto-discovery is not supported.
# Thing Configuration
The air-Q Thing must be configured with (both mandatory):
Parameter | Description |
---|---|
ipAddress | Network address, e.g. 192.168.0.68 |
password | Password of the air-Q device |
The Thing provides the following properties:
Parameter | Description |
---|---|
id | Device ID |
hardwareVersion | Hardware version |
softwareVersion | Firmware version |
sensorList | Available sensors |
sensorInfo | Information about the sensors |
industry | Industry version |
# Channels
The air-Q Thing offers access to all sensor data of the air-Q, according to its version.
This includes also the Maximum Error per sensor value.
For the Maximum Error channels just add _maxerr
to the channel names.
The rw column is empty if the channel is only readable, w if the channel can be written and rw if it allows both to be read and written.
channel | type | rw | description |
---|---|---|---|
status | String | Status of the sensors (usually "OK") | |
avgFineDustSize | Number:Length | Average size of Fine Dust [experimental] | |
fineDustCnt00_3 | Number:Dimensionless | Fine Dust >0,3 µm | |
fineDustCnt00_5 | Number:Dimensionless | Fine Dust >0,5 µm | |
fineDustCnt01 | Number:Dimensionless | Fine Dust >1 µm | |
fineDustCnt02_5 | Number:Dimensionless | Fine Dust >2,5 µm | |
fineDustCnt05 | Number:Dimensionless | Fine Dust >5 µm | |
fineDustCnt10 | Number:Dimensionless | Fine Dust >10 µm | |
co | Number | CO concentration | |
co2 | Number:Dimensionless | CO₂ concentration | |
dCO2dt | Number | Change of CO₂ concentration | |
dHdt | Number | Change of Humidity | |
dewpt | Number:Temperature | Dew Point | |
doorEvent | Number | Door Event (experimental, might not work reliably) | |
health | Number:Dimensionless | Health Index (0 to 1000, -200 for gas alarm, -800 for fire alarm) | |
humidityRelative | Number:Dimensionless | Humidity in percent | |
humidityAbsolute | Number | Absolute Humidity | |
measureTime | Number:Time | Milliseconds needed for measurement | |
no2 | Number | NO₂ concentration | |
o3 | Number | Ozone (O₃) concentration | |
o2 | Number:Dimensionless | Oxygen (O₂) concentration | |
performance | Number:Dimensionless | Performance Index (0 to 1000) | |
fineDustConc01 | Number | Fine Dust concentration >1 µm | |
fineDustConc02_5 | Number | Fine Dust concentration >2.5 µm | |
fineDustConc10 | Number | Fine Dust concentration >10 µm fni | |
pressure | Number:Pressure | Pressure | |
so2 | Number | SO₂ concentration | |
sound | Number:Dimensionless | Noise | |
temperature | Number:Temperature | Temperature | |
timestamp | DateTime | Timestamp of measurement | |
tvoc | Number:Dimensionless | VOC concentration | |
uptime | Number:Time | uptime in seconds | |
wifi | Switch | WLAN on or off | |
ssid | String | WLAN SSID | |
password | String | w | Device Password |
wifiInfo | Switch | rw | Show WLAN status with LED |
timeServer | String | rw | Name of Timeserver address |
location | Location | rw | Location of air-Q device |
nightmodeStartDay | String | rw | Time to start day operation |
nightmodeStartNight | String | rw | End of day operation |
nightmodeBrightnessDay | Number:Dimensionless | rw | Brightness of LED during the day |
nightmodeBrightnessNight | Number:Dimensionless | rw | Brightness of LED at night |
nightmodeFanNightOff | Switch | rw | Switch off fan at night |
nightmodeWifiNightOff | Switch | rw | Switch off WLAN at night |
deviceName | String | Device Name | |
roomType | String | rw | Type of room |
logLevel | String | w | Logging level |
deleteKey | String | w | Settings to be deleted |
fireAlarm | Switch | rw | Send Fire Alarm if certain levels are met |
wlanConfigGateway | String | rw | Network Gateway |
wlanConfigMac | String | rw | MAC Address |
wlanConfigSsid | String | rw | WLAN SSID |
wlanConfigIPAddress | String | rw | Assigned IP address |
wlanConfigNetMask | String | rw | Network mask |
wlanConfigBssid | String | rw | Network BSSID |
cloudUpload | Switch | rw | Upload to air-Q cloud |
averagingRhythm | Number | rw | Rhythm of measurement for historic average |
powerFreqSuppression | String | rw | Power Frequency |
autoDriftCompensation | Switch | rw | Compensate automatic drift |
autoUpdate | Switch | rw | Install Firmware updates automatically |
advancedDataProcessing | Switch | rw | Use advanced algorithms eg. for open window or presence of a person |
ppm_and_ppb | Switch | rw | Output CO as ppm and NO₂, O₃ and SO₂ as ppb value instead of mg/m3 |
gasAlarm | Switch | rw | Send Gas Alarm if certain levels are met |
soundPressure | Switch | rw | Sound Pressure Level |
alarmForwarding | Switch | rw | Forward gas or fire alarm to other air-Q devices in the household |
userCalib | String | Last sensor calibration | |
initialCalFinished | Switch | Initial calibration has finished | |
averaging | Switch | rw | Do an average |
errorBars | Switch | rw | Calculate Maximum Errors |
warmupPhase | Switch | rw | Output data as Warmup Phase |
# Example
# air-Q.things
Thing airq:airq:1 "air-Q" [ ipAddress="192.168.0.68", password="myAirQPassword" ]
# air-Q.items
String airQ_status "Status of Sensors" {channel="airq:airq:1:status"}
Number:Length airQ_avgFineDustSize "Average Size of Fine Dust" {channel="airq:airq:1:avgFineDustSize"}
Number:Dimensionless airQ_fineDustCnt00_3 "Fine Dust >0,3 µm" {channel="airq:airq:1:fineDustCnt00_3"}
Number:Dimensionless airQ_fineDustCnt00_5 "Fine Dust >0,5 µm" {channel="airq:airq:1:fineDustCnt00_5"}
Number:Dimensionless airQ_fineDustCnt01 "Fine Dust >1,0 µm" {channel="airq:airq:1:fineDustCnt01"}
Number:Dimensionless airQ_fineDustCnt02_5 "Fine Dust >2,5 µm" {channel="airq:airq:1:fineDustCnt02_5"}
Number:Dimensionless airQ_fineDustCnt05 "Fine Dust >5 µm" {channel="airq:airq:1:fineDustCnt05"}
Number:Dimensionless airQ_fineDustCnt10 "Fine Dust >10 µm" {channel="airq:airq:1:fineDustCnt10"}
Number airQ_co "CO Concentration" {channel="airq:airq:1:co"}
Number:Dimensionless airQ_co2 "CO2 Concentration" {channel="airq:airq:1:co2"}
Number airQ_dCO2dt "Change of CO2 Concentration" {channel="airq:airq:1:dCO2dt"}
Number airQ_dHdt "Change of Humidity" {channel="airq:airq:1:dHdt"}
Number:Temperature airQ_dewpt "Dew Point" {channel="airq:airq:1:dewpt"}
Number airQ_doorEvent "Door Event (exp.)" {channel="airq:airq:1:doorEvent"}
Number:Dimensionless airQ_health "Health Index" {channel="airq:airq:1:health"}
Number:Dimensionless airQ_humidityRelative "Humidity" {channel="airq:airq:1:humidityRelative"}
Number airQ_humidityAbsolute "Absolute Humidity" {channel="airq:airq:1:humidityAbsolute"}
Number:Time airQ_measureTime "Time needed for measurement" {channel="airq:airq:1:measureTime"}
Number airQ_no2 "NO2 concentration" {channel="airq:airq:1:no2"}
Number airQ_o3 "O3 concentration" {channel="airq:airq:1:o3"}
Number:Dimensionless airQ_o2 "Oxygen concentration" {channel="airq:airq:1:o2"}
Number:Dimensionless airQ_performance "Performance Index" {channel="airq:airq:1:performance"}
Number airQ_fineDustConc01 "Fine Dust Concentration >1µ" {channel="airq:airq:1:fineDustConc01"}
Number airQ_fineDustConc02_5 "Fine Dust Concentration >2.5µ" {channel="airq:airq:1:fineDustConc02_5"}
Number airQ_fineDustConc10 "Fine Dust Concentration >10µ" {channel="airq:airq:1:fineDustConc10"}
Number:Pressure airQ_pressure "Pressure" {channel="airq:airq:1:pressure"}
Number airQ_so2 "SO2 concentration" {channel="airq:airq:1:so2"}
Number:Dimensionless airQ_sound "Noise" {channel="airq:airq:1:sound"}
Number:Temperature airQ_temperature "Temperature" {channel="airq:airq:1:temperature"}
DateTime airQ_timestamp "TimeStamp [%1$td.%1$tm.%1$tY %1$tH:%1$tM]" {channel="airq:airq:1:timestamp"}
Number:Dimensionless airQ_voc "VOC concentration" {channel="airq:airq:1:tvoc"}
Number:Time airQ_uptime "Uptime" {channel="airq:airq:1:uptime"}
Number:Dimensionless airQ_cnt03_maxerr "Maximum error of Fine Dust >0,3 µm" {channel="airq:airq:1:cnt0_3_maxerr"}
Number:Dimensionless airQ_cnt05_maxerr "Maximum error of Fine Dust >0,5 µm" {channel="airq:airq:1:cnt0_5_maxerr"}
Number:Dimensionless airQ_cnt1_maxerr "Maximum error of Fine Dust >1,0 µm" {channel="airq:airq:1:cnt1_maxerr"}
Number:Dimensionless airQ_cnt25_maxerr "Maximum error of Fine Dust >2,5 µm" {channel="airq:airq:1:cnt2_5_maxerr"}
Number:Dimensionless airQ_cnt5_maxerr "Maximum error of Fine Dust >5 µm" {channel="airq:airq:1:cnt5_maxerr"}
Number:Dimensionless airQ_cnt10_maxerr "Maximum error of Fine Dust >10 µm" {channel="airq:airq:1:cnt10_maxerr"}
Number:Dimensionless airQ_co2_maxerr "Maximum error of CO2 Concentration" {channel="airq:airq:1:co2_maxerr"}
Number:Dimensionless airQ_dewpt_maxerr "Maximum error of Dew Point" {channel="airq:airq:1:dewpt_maxerr"}
Number:Dimensionless airQ_humidity_maxerr "Maximum error of Humidity" {channel="airq:airq:1:humidity_maxerr"}
Number:Dimensionless airQ_humidity_abs_maxerr "Maximum error of Absolute Humidity" {channel="airq:airq:1:humidity_abs_maxerr"}
Number:Dimensionless airQ_no2_maxerr "Maximum error of NO2 concentration" {channel="airq:airq:1:no2_maxerr"}
Number:Dimensionless airQ_o3_maxerr "Maximum error of O3 concentration" {channel="airq:airq:1:o3_maxerr"}
Number:Dimensionless airQ_oxygen_maxerr "Maximum error of Oxygen concentration" {channel="airq:airq:1:o2_maxerr"}
Number:Dimensionless airQ_pm1_maxerr "Maximum error of Fine Dust Concentration >1µ" {channel="airq:airq:1:pm1_maxerr"}
Number:Dimensionless airQ_pm2_5_maxerr "Maximum error of Fine Dust Concentration >2.5µ" {channel="airq:airq:1:pm2_5_maxerr"}
Number:Dimensionless airQ_pm10_maxerr "Maximum error of Fine Dust Concentration >10µ" {channel="airq:airq:1:pm10_maxerr"}
Number:Dimensionless airQ_pressure_maxerr "Maximum error of Pressure" {channel="airq:airq:1:pressure_maxerr"}
Number:Dimensionless airQ_so2_maxerr "Maximum error of SO2 concentration" {channel="airq:airq:1:so2_maxerr"}
Number:Dimensionless airQ_sound_maxerr "Maximum error of Noise" {channel="airq:airq:1:sound_maxerr"}
Number:Dimensionless airQ_temperature_maxerr "Maximum error of Temperature" {channel="airq:airq:1:temperature_maxerr"}
Number:Dimensionless airQ_voc_maxerr "Maximum error of VOC concentration" {channel="airq:airq:1:tvoc_maxerr"}
Switch airQ_wifi "WLAN on or off" {channel="airq:airq:1:wifi"}
String airQ_SSID "WLAN SSID" {channel="airq:airq:1:ssid"}
String airQ_password "Device Password" {channel="airq:airq:1:password"}
Switch airQ_wifiInfo "Show WLAN status with LED" {channel="airq:airq:1:wifiInfo"}
String airQ_timeServer "Name of Timeserver address" {channel="airq:airq:1:timeServer"}
Location airQ_location "Location of air-Q device" {channel="airq:airq:1:location"}
String airQ_nightMode_startDay "Time to start day operation" {channel="airq:airq:1:nightModeStartDay"}
String airQ_nightMode_startNight "End of day operation" {channel="airq:airq:1:nightModeStartNight"}
Number:Dimensionless airQ_nightMode_brightnessDay "Brightness of LED during the day" {channel="airq:airq:1:nightModeBrightnessDay"}
Number:Dimensionless airQ_nightMode_brightnessNight "Brightness of LED at night" {channel="airq:airq:1:nightModeBrightnessNight"}
Switch airQ_nightMode_fanNightOff "Switch off fan at night" {channel="airq:airq:1:nightModeFanNightOff"}
Switch airQ_nightMode_wifiNightOff "Switch off WLAN at night" {channel="airq:airq:1:nightModeWifiNightOff"}
String airQ_deviceName "Device Name" {channel="airq:airq:1:deviceName"}
String airQ_roomType "Type of room" {channel="airq:airq:1:roomType"}
String airQ_logLevel "Logging level" {channel="airq:airq:1:logLevel"}
String airQ_deleteKey "Settings to be deleted" {channel="airq:airq:1:deleteKey"}
Switch airQ_fireAlarm "Send Fire Alarm if certain levels are met" {channel="airq:airq:1:fireAlarm"}
String airQ_WLAN_config_gateway "Network Gateway" {channel="airq:airq:1:wlanConfigGateway"}
String airQ_WLAN_config_MAC "MAC Address" {channel="airq:airq:1:wlanConfigMac"}
String airQ_WLAN_config_SSID "WLAN SSID" {channel="airq:airq:1:wlanConfigSsid"}
String airQ_WLAN_config_IPAddress "Assigned IP address" {channel="airq:airq:1:wlanConfigIPAddress"}
String airQ_WLAN_config_netMask "Network mask" {channel="airq:airq:1:wlanConfigNetMask"}
String airQ_WLAN_config_BSSID "Network BSSID" {channel="airq:airq:1:wlanConfigBssid"}
Switch airQ_cloudUpload "Upload to air-Q cloud" {channel="airq:airq:1:cloudUpload"}
Number airQ_averagingRhythm "Rhythm of measurement for historic average" {channel="airq:airq:1:averagingRhythm"}
String airQ_powerFreqSuppression "Power Frequency" {channel="airq:airq:1:powerFreqSuppression"}
Switch airQ_autoDriftCompensation "Compensate automatic drift" {channel="airq:airq:1:autoDriftCompensation"}
Switch airQ_autoUpdate "Install Firmware updates automatically" {channel="airq:airq:1:autoUpdate"}
Switch airQ_advancedDataProcessing "Use advanced algorithms eg. for open window or presence of a person" {channel="airq:airq:1:advancedDataProcessing"}
Switch airQ_ppm_and_ppb "Output CO as ppm and NO2, O3 and SO2 as ppb value instead of mg/m3" {channel="airq:airq:1:ppm_and_ppb"}
Switch airQ_gasAlarm "Send Gas Alarm if certain levels are met" {channel="airq:airq:1:gasAlarm"}
Switch airQ_soundPressure "Sound Pressure Level" {channel="airq:airq:1:soundPressure"}
Switch airQ_alarmForwarding "Forward gas or fire alarm to other air-Q devices in the household" {channel="airq:airq:1:alarmForwarding"}
String airQ_userCalib "Last sensor calibration" {channel="airq:airq:1:userCalib"}
Switch airQ_initialCalFinished "Initial calibration has finished" {channel="airq:airq:1:initialCalFinished"}
Switch airQ_averaging "Do an average" {channel="airq:airq:1:averaging"}
Switch airQ_errorBars "Calculate Maximum Errors" {channel="airq:airq:1:errorBars"}
Switch airQ_warmupPhase "Output Data as Warmup Phase" {channel="airq:airq:1:warmupPhase"}