This page is part of archived documentation for openHAB 4.1. Go to the current stable version

# MCD Binding

This binding allows you to send sensor events from your openHAB environment to the cloud application Managing Care Digital (MCD) by C&S Computer und Software GmbH (opens new window).

MCD is the platform for inpatient and outpatient nursing services. Our REST API allows you to send a variety of sensor events to the system and thus being able to connect your Ambient Assisted Living (AAL) or smart home environment to the documentation software of your nursing service.

Please note that a valid account is needed to access MCD and the Sensor API.

# Supported Things

There are two supported things: MCD Bridge and MCD Sensor Thing.

# Discovery

Discovery is not supported.

# Thing Configuration

This section shows the configuration parameters of both supported things.

# MCD Bridge

The MCD Bridge (mcdBridge) needs to be configured with your valid C&S MCD / sync API credentials.

parameter description
userEmail Email of account
userPassword valid password for the given email

# MCD Sensor Thing

Each sensor thing (mcdSensor) needs to be configured with the identical serial number, that is assigned to this sensor in MCD.

parameter description
serialNumber serial number of the sensor in MCD

# Channels

The mcdSensor thing supports the following channels. To see the sensors' events, please visit Managing Care Digital (opens new window) and navigate to the dashboard.

channel type description
lastEvent String shows the last event that was sent with date and time
sendEvent String stateless channel for sending events to the API, see list below for valid commands

The channel sendEvent accepts valid Sensor Event Definitions as well as the corresponding ID. The following table contains all currently accepted Sensor Event Definitions that can be passed as String type commands. As soon as new events are added to the API, you can use their ID, even if the Definition is not yet added to this list. For more information about the API, you can have a look at the C&S Sync API (opens new window).

Valid String Type Commands
BEDEXIT
BEDENTRY
FALL
CHANGEPOSITION
BATTERYSTATE
INACTIVITY
ALARM
OPEN
CLOSE
ON
OFF
ACTIVITY
CAPACITY
GAS
VITALVALUE
ROOMEXIT
ROOMENTRY
REMOVESENSOR
SITDOWN
STANDUP
INACTIVITYROOM
SMOKEALARM
HEAT
COLD
QUALITYAIR
ALARMAIR
ROOMTEMPERATURE
HUMIDITY
AIRPRESSURE
CO2
INDEXUV
WEARTIME
FIRSTURINE
NEWDIAPER
DIAPERREMOVED
NOCONNECTION
LOWBATTERY
CONTROLLSENSOR
LYING
SPILLED
DAMAGED
GEOEXIT
GEOENTRY
WALKING
RESTING
TURNAROUND
HOMEEMERGENCY
TOILETFLUSH
DORSALPOSITION
ABDOMINALPOSITION
LYINGLEFT
LYINGRIGHT
LYINGHALFLEFT
LYINGHALFRIGHT
MOVEMENT
PRESENCE
NUMBERPERSONS
BRIGHTNESSZONE

# Full Example

Here is an example for the textual configuration. You can of course use the Administration section of the GUI as well.

demo.things:

Bridge mcd:mcdBridge:exampleBridge [userEmail="[email protected]", userPassword="your.password"]{
    Thing mcd:mcdSensor:examlpeSensor [serialNumber="123"]
    Thing mcd:mcdSensor:secondExamlpeSensor [serialNumber="456"]
}

demo.items:

String lastValue "Last Value" {channel="mcd:mcdSensor:examlpeSensor:lastValue"}
String sendEvent "Send Event" {channel="mcd:mcdSensor:examlpeSensor:sendEvent"}

demo.sitemap:

Text item=sendEvent
Text item=lastValue