This page is part of archived documentation for openHAB 4.1. Go to the current stable version
# Nest Binding
The Nest binding integrates devices by Nest (opens new window) using the Smart Device Management (opens new window) (SDM) API.
To be able to use the SDM API it is required to first register (opens new window) and pay a US$5 non-refundable registration fee.
Because the SDM API runs on servers in the cloud, a connection with the Internet is required for sending and receiving information. The binding uses HTTPS to connect to the APIs using port 443. So make sure outbound connections to these ports are not blocked by a firewall.
Note: This binding no longer supports the Works with Nest (WWN) API because it has been discontinued by Google. See Support for Works with Nest ending (opens new window).
# Supported Things
The table below lists the Nest binding thing types:
| Things | Description | Thing Type |
|---|---|---|
| Nest Account | An account for using the Nest SDM REST API | sdm_account |
| Nest Cam (Indoor, IQ, Outdoor), Dropcam | A Nest Cam registered with your account | sdm_camera |
| Nest Hello Doorbell | A Nest Doorbell registered with your account | sdm_doorbell |
| Nest Hub (Max) | A Nest Display registered with your account | sdm_display |
| Nest Thermostat (E) | A Thermostat to control the various aspects of the house's HVAC system | sdm_thermostat |
The SDM API currently does not support Nest Protect devices.
To use the Nest SDM API, add an Account Thing using the UI and configure the required parameters. After configuring an Account Thing, you can use it to discover the connected devices which are then added the Inbox.
# Account Configuration
# Google Account Requirement
To be able to use the SDM API it is required that you use a Google Account with your Nest devices. To migrate to a Google account, follow the migration steps in the Nest accounts FAQ (opens new window)
# Configuration Parameters
These parameters configure which SDM project is accessed using the SDM API and configure the OAuth 2.0 client details used for accessing the project.
First a SDM project needs to be created and configured:
- Register for device access by clicking the "Go to Device Access Console" button and follow the instructions on the Device Access Registration (opens new window) page.
- Create a new SDM project on the Projects (opens new window) page
- Give your project a name so it is easily recognizable
- "Skip" entering the OAuth client ID for now
- If you want to download camera images using the binding, it is required to "Enable" events. Enabling events also allows for faster thermostat state updates. The binding only uses events when the Pub/Sub configuration parameters of the Nest SDM Account Thing are also configured.
- After clicking the "Create project" button, the SDM project details of the created project show
- Copy and save the Project ID at the top of the page (e.g.
585de72e-968c-435c-b16a-31d1d3f76833) somewhere
Now an OAuth 2.0 client is created and configured for using the SDM API by the binding:
- Configure the "Publishing status" of your Google Cloud Platform to "Production" (APIs & Services > OAuth consent screen (opens new window)) so the OAuth 2.0 tokens do not expire after 2 weeks
- Create a new client on the "Credentials" page (APIs & Services > Credentials (opens new window)):
- Click the "Create Credentials" button at the top of the page
- Choose "OAuth client ID"
- As "Application type" choose "Web application"
- Give it a name so you can remember what it is used for (e.g.
Nest Binding SDM) - Add "https://www.google.com (opens new window)" to the "Authorized redirect URIs"
- Click "Create" to create the client
- Copy and save the generated Client ID (e.g.
1046297811237-3f5sj4ccfubit0fum027ral82jgffsd1.apps.googleusercontent.com) and Client Secret (e.g.726kcU-d1W4RXxEJA79oZ0oG) somewhere
- Configure the SDM project to use the created client:
- Go the the SDM Projects (opens new window) page
- Click on your SDM Project to show its details
- Scroll to "Project Info > OAuth client ID" and open the options menu (3 stacked dots) at the end of the line
- Select the "Edit" option
- Copy/paste the saved OAuth 2.0 Client ID here (e.g.
1046297811237-3f5sj4ccfubit0fum027ral82jgffsd1.apps.googleusercontent.com) - Click the "Save" button at the end of the line to update the project
Finally, an SDM Account Thing can be created to access the SDM project using the SDM API with the created client:
- Create a new "Nest SDM Account" Thing in openHAB
- Copy/paste the saved SDM Project ID to SDM group parameter in the SDM Account Thing configuration parameters (e.g.
585de72e-968c-435c-b16a-31d1d3f76833) - Copy/paste the saved OAuth 2.0 Client ID to SDM group parameter (e.g.
1046297811237-3f5sj4ccfubit0fum027ral82jgffsd1.apps.googleusercontent.com) - Copy/paste the saved OAuth 2.0 Client Secret to SDM group parameter (e.g.
726kcU-d1W4RXxEJA79oZ0oG) - Create an authorization code for the binding:
Replace the Project ID and Client ID in the URL below with your SDM Project ID and SDM OAuth 2.0 Client ID and open the URL in a new browser tab:
https://nestservices.google.com/partnerconnections/<ProjectID>/auth?scope=https://www.googleapis.com/auth/sdm.service&access_type=offline&prompt=consent&include_granted_scopes=true&response_type=code&redirect_uri=https://www.google.com&client_id=<ClientID>For the example values used so far this is:
https://nestservices.google.com/partnerconnections/585de72e-968c-435c-b16a-31d1d3f76833/auth?scope=https://www.googleapis.com/auth/sdm.service&access_type=offline&prompt=consent&include_granted_scopes=true&response_type=code&redirect_uri=https://www.google.com&client_id=1046297811237-3f5sj4ccfubit0fum027ral82jgffsd1.apps.googleusercontent.comEnable all the permissions you want to use with the binding and click "Next" to continue
Login using your Google account when prompted
On the "Google hasn't verified this app" page, click on "Advanced"
Then click on "Go to ... (advanced)"
Now "Allow" the SDM permissions and confirm your choices again by clicking "Allow"
After your browser has been redirected to https://www.google.com (opens new window), the Authorization Code will be set in the browser URL as value of the "code" URL query parameter
Copy/paste the Authorization Code to the SDM group parameter in the openHAB Nest SDM Account Thing configuration
- All required SDM Account Thing configuration parameters have now been entered so create it by clicking "Create Thing"
The SDM Account Thing should now be ONLINE and have as status description "Using periodic refresh".
Next click the "Enable" button on the Smart Device Management API (opens new window) page for your GCP project to enable the SDM API.
Now it should also be possible to use the configured account to discover your Nest devices via the Inbox.
You can monitor the SDM API using the Google Cloud Platform Console via API & Services > Smart Device Management API (opens new window).
If you've made it this far, it should be easy to edit the SDM Account Thing again and update it so it can also use SDM Pub/Sub events. 😃
# Pub/Sub Configuration Parameters
After configuring the SDM configuration parameters, a SDM Account Thing can be updated so it can listen to SDM events using Pub/Sub. This is required if you want to download camera images using the binding or to get faster thermostat state updates.
Enable Pub/Sub events in your SDM project:
- Open your SDM project details using the Projects (opens new window) page
- Scroll to "Project Info > Pub/Sub topic" and check if it is set to "Enabled"
- If it is set to "Disabled", enable events:
- Open the options menu (3 stacked dots) at the end of the line
- Select the "Edit" option
- Check the "Enable events" option
- Click the "Save" button at the end of the line to update the project
Lookup your Google Cloud Platform (GCP) Project ID:
- Open the IAM & Admin > Settings (opens new window)
- Copy and save the GCP Project ID (e.g.
openhab-12345)
Next an OAuth 2.0 client is created which is used to create a Pub/Sub subscription for listening to SDM events by the binding:
- Open the "Credentials" page (APIs & Services > Credentials (opens new window)):
- Click the "Create Credentials" button at the top of the page
- Choose "OAuth client ID"
- As "Application type" choose "Web application"
- Give it a name so you can remember what it is used for (e.g.
Nest Binding Pub/Sub) - Add "https://www.google.com (opens new window)" to the "Authorized redirect URIs"
- Click "Create" to create the client
- Copy and save the generated Client ID (e.g.
1046297811237-lg27h26kln6r1nbg54jpg6nfjg6h4b3n.apps.googleusercontent.com) and Client Secret (e.g.1-k78-XcHhp_gdZF-I6JaIHp) somewhere
Finally, the existing SDM Account Thing can be updated so it can subscribe to SDM events:
Open the configuration details of your existing "Nest SDM Account" Thing in openHAB
Copy/paste the saved GCP Project ID to Pub/Sub group parameter (e.g.
openhab-123)Enter a name in Subscription ID that uniquely identifies the Pub/Sub subscription used by the binding
Must be 3-255 characters, start with a letter, and contain only the following characters: letters, numbers, dashes (-), periods (.), underscores (_), tildes (~), percents (%) or plus signs (+). Cannot start with goog.
Copy/paste the saved OAuth 2.0 Client ID to Pub/Sub group parameter (e.g.
1046297811237-lg27h26kln6r1nbg54jpg6nfjg6h4b3n.apps.googleusercontent.com)Copy/paste the saved OAuth 2.0 Client Secret to Pub/Sub group parameter (e.g.
1-k78-XcHhp_gdZF-I6JaIHp)Create an authorization code for the binding:
Replace the Client ID in the URL below with your Pub/Sub OAuth 2.0 Client ID and open the URL in a new browser tab:
https://accounts.google.com/o/oauth2/v2/auth?scope=https://www.googleapis.com/auth/pubsub&access_type=offline&prompt=consent&include_granted_scopes=true&response_type=code&redirect_uri=https://www.google.com&client_id=<ClientID>For the example client this is:
https://accounts.google.com/o/oauth2/v2/auth?scope=https://www.googleapis.com/auth/pubsub&access_type=offline&prompt=consent&include_granted_scopes=true&response_type=code&redirect_uri=https://www.google.com&client_id=1046297811237-lg27h26kln6r1nbg54jpg6nfjg6h4b3n.apps.googleusercontent.comLogin using your Google account when prompted
On the "Google hasn't verified this app" page, click on "Advanced"
Then click on "Go to ... (advanced)"
Now "Allow" the Pub/Sub permissions and confirm your choices again by clicking "Allow"
After your browser has been redirected to https://www.google.com (opens new window), the Authorization Code will be set in the browser URL as value of the "code" URL query parameter
Copy/paste the Authorization Code to the Pub/Sub group parameter in the openHAB Nest SDM Account Thing configuration
All required Pub/Sub Account Thing configuration parameters have now been entered so click "Save" to update the SDM Account Thing configuration
The SDM Account Thing should now be ONLINE and have as status description "Using periodic refresh and Pub/Sub".
The created subscription can also be monitored using the Google Cloud Platform Console via Pub/Sub > Subscriptions (opens new window).
# SDM Device Configuration
| Configuration Parameter | Required | Default | Description |
|---|---|---|---|
| deviceId | X | Identifies the device in the SDM API | |
| refreshInterval | 300 | This is refresh interval in seconds to update the Nest device information |
Decreasing the refreshInterval may cause issues when you have a lot of devices connected because it may cause API rate limits to be exceeded.
You may want to decrease the refreshInterval for a Thermostat if Pub/Sub events have not been configured to provide state updating.
# Discovery
The binding will discover all Nest Things from your account when you add and configure a Nest Account Thing.
# Channels
# Account Channels
The account Thing Types do not have any channels.
# Camera/Display/Doorbell Channels
The state of these channels is based on Pub/Sub events sent by the SDM API.
So make sure the Pub/Sub account details are properly configured in the sdm_account.
| Channel Type ID | Item Type | Description | Read Write |
|---|---|---|---|
| chime_event#image | Image | Static image based on a chime event | R |
| chime_event#timestamp | DateTime | The last time that the door chime was pressed | R |
| live_stream#current_token | String | Live stream current token value | R |
| live_stream#expiration_timestamp | DateTime | Live stream token expiration time | R |
| live_stream#extension_token | String | Live stream token extension value | R |
| live_stream#url | String | The RTSP video stream URL for the most recent event | R |
| motion_event#image | Image | Static image based on a motion event | R |
| motion_event#timestamp | DateTime | The last time that motion was detected | R |
| person_event#image | Image | Static image based on a person event | R |
| person_event#timestamp | DateTime | The last time that a person was detected | R |
| sound_event#image | Image | Static image based on a sound event | R |
| sound_event#timestamp | DateTime | The last time that a sound was detected | R |
The chime_event group channels only exist for doorbell Things.
Each image channel has the imageWidth and imageHeight configuration parameters that can be used for configuring the image size in pixels.
The maximum camera resolution is listed as maxImageResolution property in the Thing properties.
# Thermostat Channels
| Channel Type ID | Item Type | Description | Read Write |
|---|---|---|---|
| ambient_humidity | Number:Dimensionless | Lists the current ambient humidity percentage from the thermostat | R |
| ambient_temperature | Number:Temperature | Lists the current ambient temperature from the thermostat | R |
| current_eco_mode | String | Lists the current eco mode from the thermostat (OFF, MANUAL_ECO) | R/W |
| current_mode | String | Lists the current mode from the thermostat (OFF, HEAT, COOL, HEATCOOL) | R/W |
| fan_timer_mode | Switch | Lists the current fan timer mode | R/W |
| fan_timer_timeout | DateTime | Timestamp at which timer mode turns OFF | R/W |
| hvac_status | String | Provides the thermostat HVAC Status (OFF, HEATING, COOLING) | R |
| maximum_temperature | Number:Temperature | Lists the maximum temperature setting from the thermostat | R/W |
| minimum_temperature | Number:Temperature | Lists the target temperature setting from the thermostat | R/W |
| target_temperature | Number:Temperature | Lists the target temperature setting from the thermostat | R/W |
| temperature_cool | Number:Temperature | Lists the heat temperature Setting from the thermostat | R |
| temperature_heat | Number:Temperature | Lists the heat temperature setting from the thermostat | R |
The fan_timer_mode channel has a fanTimerDuration configuration parameter that can be used for configuring how long the fan is ON before it is switched OFF (1s to 43200s).
Similarly, when a DateTime command is sent to the fan_timer_timeout channel, the fan timer is switched ON and runs until the timestamp in the command (min now+1s, max now+43200s).
# Example
You can use the discovery functionality of the binding to obtain the deviceId and structureId values for defining Nest things in files.
# sdm-demo.things
Bridge nest:sdm_account:demo_sdm_account [ sdmProjectId="585de72e-968c-435c-b16a-31d1d3f76833", sdmClientId="1046297811237-3f5sj4ccfubit0fum027ral82jgffsd1.apps.googleusercontent.com", sdmClientSecret="726kcU-d1W4RXxEJA79oZ0oG", sdmAuthorizationCode="xkkY3qYtfZCzaXCcPxpOELUW8EhgiSMD3n9jmzJ3m0yerkQpVRdj5vqWRjMSIG", pubsubProjectId="openhab-12345", pubsubSubscriptionId="nest-sdm-events", pubsubClientId="1046297811237-lg27h26kln6r1nbg54jpg6nfjg6h4b3n.apps.googleusercontent.com", pubsubClientSecret="1-k78-XcHhp_gdZF-I6JaIHp", pubsubAuthorizationCode="tASfQq7gn6sfbUSbwRufbMI0BYDzh1d7MBG2G7vdZpbhjmZfwDp5MkeaX0iMxn" ] {
Thing sdm_camera fish_cam [ deviceId="AVPHwTQCAhersqmQ3IXwyqSX-XyuVZXoiNSNPeHdIMKgYpYZolNP4S9LS5QDF2LeuM3BQcpBh_fOEZYxkeH6eoQdWEELqi" ] {
Channels:
Image : motion_event#image [ imageHeight=1080 ]
Image : person_event#image [ imageWidth=1920 ]
Image : sound_event#image [ imageHeight=1080 ]
}
Thing sdm_doorbell front_door [ deviceId="AVPHws4JWeIzZlru3DSxXoKnIgPntKpzax7a1Zwms8H0-HaRet2pTdTCPOTBZ74YDzYqq7w6XpEPwOTkBXtf4KCJ4nq9hq" ] {
Channels:
Image : chime_event#image [ imageWidth=1920 ]
}
Thing sdm_display kitchen_hub [ deviceId="AVPHw64dWG5CcAJdDNzBbHWgu91l4v8WA4CsJqgtrvMS3QrbDnurB0_WzZEwpcWaw8Y9rLEQXW0avEwCjTd40Gmia6ussU" ]
Thing sdm_thermostat living_thermostat [ deviceId="AVPHwQum_bx9LmiRfv6jv5qPcKho0vHx2HqqMUvXP3TD-TTDCJebbzkegpRMozU5t7GSeTQIzxdH2LYDsZO8RClcGj7CCT", refreshInterval=180 ] {
Channels:
Image : fan_timer_mode [ fanTimerDuration=7200 ]
}
}
# sdm-demo.items
/* SDM Doorbell */
Image Doorbell_Chime_Image "Chime Image" { channel="nest:sdm_doorbell:demo_sdm_account:front_door:chime_event#image" }
DateTime Doorbell_Chime_Timestamp "Chime Timestamp [%1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS]" { channel="nest:sdm_doorbell:demo_sdm_account:front_door:chime_event#timestamp" }
String Doorbell_Stream_Token "Stream Token [%s]" { channel="nest:sdm_doorbell:demo_sdm_account:front_door:live_stream#current_token" }
DateTime Doorbell_Stream_Timestamp "Stream Timestamp [%1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS]" { channel="nest:sdm_doorbell:demo_sdm_account:front_door:live_stream#expiration_timestamp" }
String Doorbell_Stream_Ext_Token "Stream Extension Token [%s]" { channel="nest:sdm_doorbell:demo_sdm_account:front_door:live_stream#extension_token" }
String Doorbell_Stream_URL "Stream Extension URL [%s]" { channel="nest:sdm_doorbell:demo_sdm_account:front_door:live_stream#url" }
Image Doorbell_Motion_Image "Motion Image" { channel="nest:sdm_doorbell:demo_sdm_account:front_door:motion_event#image" }
DateTime Doorbell_Motion_Timestamp "Motion Timestamp [%1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS]" { channel="nest:sdm_doorbell:demo_sdm_account:front_door:motion_event#timestamp" }
Image Doorbell_Person_Image "Person Image" { channel="nest:sdm_doorbell:demo_sdm_account:front_door:person_event#image" }
DateTime Doorbell_Person_Timestamp "Person Timestamp [%1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS]" { channel="nest:sdm_doorbell:demo_sdm_account:front_door:person_event#timestamp" }
Image Doorbell_Sound_Image "Sound Image" { channel="nest:sdm_doorbell:demo_sdm_account:front_door:sound_event#image" }
DateTime Doorbell_Sound_Timestamp "Sound Timestamp [%1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS]" { channel="nest:sdm_doorbell:demo_sdm_account:front_door:sound_event#timestamp" }
/* SDM Thermostat */
Number:Dimensionless Thermostat_Amb_Humidity "Ambient Humidity [%.1f %unit%]" { channel="nest:sdm_thermostat:demo_sdm_account:living_thermostat:ambient_humidity" }
Number:Temperature Thermostat_Amb_Temperature "Ambient Temperature [%.1f %unit%]" { channel="nest:sdm_thermostat:demo_sdm_account:living_thermostat:ambient_temperature" }
String Thermostat_Current_Eco_Mode "Current Eco Mode [%s]" { channel="nest:sdm_thermostat:demo_sdm_account:living_thermostat:current_eco_mode" }
String Thermostat_Current_Mode "Current Mode [%s]" { channel="nest:sdm_thermostat:demo_sdm_account:living_thermostat:current_mode" }
Switch Thermostat_Fan_Timer_Mode "Fan Timer Mode" { channel="nest:sdm_thermostat:demo_sdm_account:living_thermostat:fan_timer_mode" }
DateTime Thermostat_Fan_Timer_Timeout "Fan Timer Timeout [%1$tY-%1$tm-%1$td %1$tH:%1$tM:%1$tS]" { channel="nest:sdm_thermostat:demo_sdm_account:living_thermostat:fan_timer_timeout" }
String Thermostat_HVAC_Status "HVAC Status [%s]" { channel="nest:sdm_thermostat:demo_sdm_account:living_thermostat:hvac_status" }
Number:Temperature Thermostat_Max_Temperature "Max Temperature [%.1f %unit%]" { channel="nest:sdm_thermostat:demo_sdm_account:living_thermostat:maximum_temperature" }
Number:Temperature Thermostat_Min_Temperature "Min Temperature [%.1f %unit%]" { channel="nest:sdm_thermostat:demo_sdm_account:living_thermostat:minimum_temperature" }
Number:Temperature Thermostat_Target_temperature "Target Temperature [%.1f %unit%]" { channel="nest:sdm_thermostat:demo_sdm_account:living_thermostat:target_temperature" }
Number:Temperature Thermostat_Temperature_Cool "Temperature Cool [%.1f %unit%]" { channel="nest:sdm_thermostat:demo_sdm_account:living_thermostat:temperature_cool" }
Number:Temperature Thermostat_Temperature_Heat "Temperature Heat [%.1f %unit%]" { channel="nest:sdm_thermostat:demo_sdm_account:living_thermostat:temperature_heat" }