This page is part of archived documentation for openHAB 4.1. Go to the current stable version

# TasmotaPlug Binding

This binding connects Tasmota flashed smart plugs with 1, 2, 3 or 4 relay channels to openHAB. The plug must report the status of the relay via the url http://$PLUG_IP/cm?cmnd=Power in order for the binding to work. See the Tasmota Supported Devices Repository (opens new window) for a list of supported plugs.

# Supported Things

There is exactly one supported thing type, which represents any supported Tasmota smart plug. It has the plug id. Multiple Things can be added if more than one plug is to be controlled.

# Discovery

Discovery is not supported. All things must be added manually.

# Thing Configuration

At minimum, the host name must be specified. The refresh interval and number of channels can be overridden from the default.

Parameter	Description
hostName	The host name or IP address of the plug. Mandatory.
refresh	Overrides the refresh interval of the plug status. Optional, the default is 30 seconds.
numChannels	Number of channels on the Tasmota Plug (1-4). Optional, the default is 1
username	Username for authentication with the Tasmota Plug. Default 'admin'
password	Password for authentication with the Tasmota Plug, if not supplied auth is disabled.

# Channels

The number of channels depends of on the numChannels configuration parameter. Channels above the number specified are automatically removed. Therefore numChannels cannot be changed upward after Thing creation. If the number of channels must be increased, delete the Thing and re-create it with the correct number.

Channel ID	Item Type	Description
power	Switch	Turns the smart plug relay #1 ON or OFF
power2	Switch	Turns the smart plug relay #2 ON or OFF
power3	Switch	Turns the smart plug relay #3 ON or OFF
power4	Switch	Turns the smart plug relay #4 ON or OFF

# Full Example

tasmotaplug.things:

tasmotaplug:plug:plug1 "Plug 1" [ hostName="192.168.10.1", refresh=30 ]
tasmotaplug:plug:plug2 "Plug 2" [ hostName="myplug2", refresh=30 ]

tasmotaplug.items:

Switch Plug1 "Plug 1 Power" { channel="tasmotaplug:plug:plug1:power" }

Switch Plug2a "4ch Power 1" { channel="tasmotaplug:plug:plug2:power" }
Switch Plug2b "4ch Power 2" { channel="tasmotaplug:plug:plug2:power2" }
Switch Plug2c "4ch Power 3" { channel="tasmotaplug:plug:plug2:power3" }
Switch Plug2d "4ch Power 4" { channel="tasmotaplug:plug:plug2:power4" }

tasmotaplug.sitemap:

sitemap tasmotaplug label="My Tasmota Plugs" {
    Frame label="Plugs" {
        Switch item=Plug1

        Switch item=Plug2a
        Switch item=Plug2b
        Switch item=Plug2c
        Switch item=Plug2d
    }
}

Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)

← TapoControl Telegram →